A microcalorimetric study of the association of hexacyanoferrate(II) ions with calcium and magnesium ions in aqueous solution

Using flow microcalorimetry, the ion association reaction M²⁺(aq)+Fe(CN) ₆ ^4– (aq)=MFe(CN) ₆ ^2– (aq) (M=Ca, Mg) has been studied at 25°C over the ionic strength range 0.02 to 0.08 mol-dm^–3. Analyses of the data to obtain H^o, the enthalpy change at infinite dilution, are described. The value obtained for H^o is sensitive to the kind of functions used to correct for non-ideal behavior.     

圆盘膜萃取、色质联用仪及选择离子法(SIM)测定河水中多环芳烃, 多氯联苯, 酞酸酯等半挥发有机物

通过圆盘膜萃取提取河水中多环芳烃、多氯联苯,肽酸酯等半挥发有机物,并用气质联用仪及选择离子(SIM)进行样品定量分析,加标回收率在70%~130%之间,测定检出限达到pg/mL级(10-12)水平.     

Genetic engineering to enhance the selectivity of protein separations

The ability to recover and purify natural and recombinant proteins, and the costs of doing so remain a major task in introducing the potential products of biotechnology. The bases for separation range from specific binding onto tailored reagents to solubility and partitioning behavior governed by a mixed bag of size, charge, and hydrophobicity. In most cases, a combination of methods is used in sequence, and improvements in the selectivity at an early stage can enhance the effectiveness of subsequent (and usually more costly) steps. Genetic engineering provides a means of improving the selectivity within the context of existing separation methods. By this strategy, improvements in selectivity are sought by bestowing a distinctive property on the protein of interest. The primary sequence of amino acids is altered, such that the protein can be selectively removed from other components of the multicomponent mixture in which such products are commonly found. In this article, the range of these “distinctive properties” and their pairing with various separation methods will be reviewed. Specific examples from our work, in which a distinctive charge is provided via a polypeptide “purification” fusion tail, will be discussed. Separation methods we have used with these fusion proteins are precipitation, two-phase aqueous extraction, reversed micellar extraction, and ion exchange using both resins and membranes.     

四元交互体系Li~＋，Mg~（2＋）／Cl~－，SO_4~（2－）－H_2O

本文采用等温溶解平衡法研究了四元交互体系Ｌｉ＋，Ｍｇ２＋／ＣＩ－，ＳＯ－Ｈ２Ｏ２５℃的机关系和平衡液相的物化性质（密度、粘度、电导率、折光率和ｐＨ）．该体系２５℃有七个相区Ｌｉ２ＳＯ４·Ｈ２Ｏ，ＭｇＳＯ４·７Ｈ２Ｏ．ＭｇＳＯ４·６Ｈ２Ｏ．ＭｇＳＯ４·５Ｈ２Ｏ，ＭｇＣ１２，６Ｈ２Ｏ，ＬｉＣＩ．ＭｇＣｌ２．７Ｈ２Ｏ，ＬｉＣＩ·Ｈ２Ｏ，十一条单变量线，五个共饱点．其中ＬｉＣＩ·Ｈ２Ｏ＋ＬｉＣＩ·ＭｇＣｌ２·７Ｈ２Ｏ＋Ｌｉ２ＳＯ４·Ｈ２Ｏ为一致零变量点．与文献中的研究结果比较，我们得到两个新相区ＭｇＳＯ４·６Ｈ２Ｏ和ＭｇＳＯ４·５Ｈ２Ｏ．用经验和半经验公式计算了平衡液相的密度、折光率．由实验测定的溶解度数据求得了高锂浓度下的Ｐｉｔｚｅｒ参数．对该体系２５℃溶解度进行了理论计算复证．     

pH,Definition and measurement at high temperatures

In this review paper, the NBS scale and its limitations are briefly discussed. The magnitude of liquid junction potentials and some calculated values are presented. The use of a molality scale for hydrogen electrode concentration cells at high temperatures is described, and results from measurements on ionization equilibria are summarized. Use of this scale is also recommended for certain circumstances with cells without liquid junction. As an alternative activity scale, use of the Pitzer ion-interaction treatment for ions is recommended for special cases. Finally, reference data are presented for _±HCl in HCl(aq) to 350°C and (HCl+NaCl)(aq) to 200°C that were derived by use of the Pitzer ion-interaction treatment.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Chromatographic separation of some metal ions on NTA-impregnated thin-layer plates

Summary NTA (nitrilo triacetic acid) has been used as an impregnating agent for an efficient TLC separation of twelve metal ions, using a mixture of 5% aq ammonia, ethanol acetone and acetic acid as the solvent system and dithizone (0.5% in chloroform) for visualization.     

磷脂液相二次离子质谱分析中的分子离子簇

对3种极性头不同的磷脂DMPG、DMPC、DMPE的液相二次离子质谱分析中出现 的分子离子簇现象进行了系统的研究。结果表明，虽然分子离子簇的形成与许多因素有关， 如PH值、离子强度等，但起决定作用的是样品在底物中的浓度，浓度增大有利于分子离子簇 的形成。研究还发现，由不同种类磷脂分子形成的分子离子簇峰明显高于由同种磷脂分子所 形成的分子离子簇峰，指出异种磷脂分子间的簇离子形成能力高于同种磷脂分子。此外还讨 论了磷脂分子在离子源条件下的稳定性、裂解规律及相互作用等。结果表明，本实验所选用 的磷脂分子在LSIMS条件下是稳定的，均能得到较强的分子离子峰，其主要碎片峰是磷酰键断裂而产生的碎片离子峰。     

Nontrivial structural organization of pivalate complexes with the fragment {Fe2Li(μ3-O)}

1. Download : Download high-res image (228KB)
2. Download : Download full-size image

     

基于MCM-41分子筛表面的镱离子印迹聚合物的制备及其性能

运用离子印迹技术,以3-氯丙基三乙氧基硅烷为锚定剂,将功能单体直链聚乙烯亚胺(PEI)接枝在MCM-41分子筛表面,选择镱离子作为模板离子,以环氧氯丙烷交联制备出基于MCM-41表面的镱离子印迹聚合物Yb(Ⅲ)-IIP-PEI/MCM-41,并以同样的方法制备非离子印迹聚合物(NIP-PEI/MCM-41)。 利用傅里叶变换红外光谱仪和扫描电子显微镜等技术手段对Yb³⁺印迹聚合物进行表征,采用静态吸附法确定了Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺的最佳吸附条件及选择性吸附性能。 结果表明,Yb(Ⅲ)-IIP-PEI/MCM-41和NIP-PEI/MCM-41的最大吸附量分别为229.93和99.27 mg/g;印迹材料对Yb³⁺的吸附符合Langmuir模型;吸附平衡在40 min的时候基本可以达到,可以利用准二级动力学模型来描述其吸附过程;Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺具有较强的选择性,同时也具有很好的重复使用性能。 成功地将MCM-41和离子印迹聚合物的优点结合起来,制备出一种对稀土Yb离子既有高吸附量又有高选择性的吸附材料,为进一步将其应用在处理实际废水,分离回收低浓度稀土废水中的稀土元素等方面打下了基础。     

Structural and electrochemical studies of annealed LiNiVO4 thin films

We prepared stoichiometric lithium nickel vanadate amorphous thin films by using r.f. magnetron sputtering under controlled oxygen partial pressure. The amorphous films were heated at various temperatures, 300–600 °C, for 8 h. The as‐deposited and annealed thin films were characterized by Rutherford backscattering spectroscopy, nuclear reaction analysis, Auger electron spectroscopy, X‐ray diffraction, scanning electron microscopy and atomic force microscopy. The electrochemical behavior of the various films was studied by the galvanostatic method. The cells were tested in a liquid electrolyte at room temperature, with lithium metal used as the counter and reference electrode. The best electrochemical storage value was obtained with the thin film annealed at 300 °C, which showed superior capacity and small capacity loss during cycling. Copyright © 2007 John Wiley & Sons, Ltd.